Achieve the JN0-104 Exam Best Results with Help from Juniper Certified Experts
Provide JN0-104 Practice Test Engine for Preparation
NEW QUESTION # 40
Click the Exhibit button.
Referring to the exhibit, what happens to a packet that has a destination address of 172.17.0.1?
- A. The packet is rejected and an ICMP network unreachable message is sent to the source address.
- B. The packet is silently discarded.
- C. The packet is forwarded to the next hop of the management network.
- D. The packet is forwarded to the next hop defined in the default route.
Answer: A
NEW QUESTION # 41
Which of these are true? (Choose three)
- A. UDP is connection-oriented
- B. UDP is a reliable protocol
- C. UDP is faster than TCP
- D. UDP communication is best-effort
- E. UDP and TCP operate at the Transport Layer
Answer: C,D,E
NEW QUESTION # 42
What is the network address for a host with an IP address of 192.168.87.125/16?
- A. 192.168.0.0
- B. 192.168.87.0
- C. 192.168.96.0
- D. 192.168.128.0
Answer: A
Explanation:
The network address for a host is determined by performing a bitwise AND operation between the host's IP address and the subnet mask. In this case, the IP address is 192.168.87.125 and the subnet mask is 255.255.0.0 (or /16), which means that the first 16 bits are used for the network portion of the address and the remaining 16 bits are used for the host portion.
To find the network address, we perform the bitwise AND operation:
192.168.87.125 (IP address)
& 255.255.0.0 (subnet mask)
= 192.168.0.0 (network address)
So, the network address for a host with an IP address of 192.168.87.125/16 is 192.168.0.0.
NEW QUESTION # 43
You must segment your internal 192.168.1.0/24 network into a minimum of 12 subnets, each containing a minimum of 12 hosts.
Which network mask do you use?
- A. /28
- B. /26
- C. /27
- D. /29
Answer: A
NEW QUESTION # 44
Which command prompt indicates that you are in operational mode?
- A. user @ router >
- B. user @ router #
- C. user @ router $
- D. user @ router &
Answer: A
NEW QUESTION # 45
The IP address 192.168.100.1 belongs to which class of IP address space?
- A. Class A
- B. Class C
- C. Class B
- D. Class D
Answer: B
NEW QUESTION # 46
How would you change the display so that 40 lines will be displayed in the terminal program when you are logged into a Junos device?
- A. Set the display options in your terminal program.
- B. Issue the set cli screen-length 40 command from configuration mode
- C. Set the window size of your terminal program.
- D. Issue the set cli screen-length 40 command from operational mode.
Answer: D
NEW QUESTION # 47
Click the Exhibit button.
A user attempts to log in to a Junos device. but the RADIUS server is unreachable.
Referring to the exhibit, what is the default action of a Junos device in this scenario?
- A. The Junos device prompts for a cached RADIUS password.
- B. The Junos device displays a RADIUS connection error.
- C. The Junos device retries every 30 seconds until the connection is restored.
- D. The Junos device uses the local authentication database.
Answer: B
NEW QUESTION # 48
Which layer of the OSI Model performs error checking?
- A. Data Link Layer
- B. Physical Layer
- C. Transport Layer
- D. Network Layer
Answer: A
NEW QUESTION # 49
Click the Exhibit button
Referring to the exhibit, you are unable to reach devices in the 172.19.25.0/28 subnet.
What should you do to solve this problem?
- A. Enable the ge-0/0/2.2 interface.
- B. Enable the ge-0/0/2.0 interface.
- C. Enable the ge-0/0/2 interface.
- D. Enable the ge-0/0/2.1 interface.
Answer: B
NEW QUESTION # 50
Click the Exhibit button.
A user attempts to log in to a Junos device. but the RADIUS server is unreachable.
Referring to the exhibit, what is the default action of a Junos device in this scenario?
- A. The Junos device prompts for a cached RADIUS password.
- B. The Junos device displays a RADIUS connection error.
- C. The Junos device retries every 30 seconds until the connection is restored.
- D. The Junos device uses the local authentication database.
Answer: B
NEW QUESTION # 51
Which J-Web tab contains the ping and traceroute utilities?
- A. "monitor''
- B. "maintain"
- C. "Configure"
- D. ''Troubleshoot"
Answer: D
NEW QUESTION # 52
Which of these are routing tables found by default? (Choose three)
- A. inet.6
- B. inet4.0
- C. inet.3
- D. inet.0
- E. inet6.0
Answer: C,D,E
NEW QUESTION # 53
Which operational command allows you to quickly verify the state of all physical and logical interfaces?
- A. show interfaces routing
- B. show interfaces brief
- C. show interfaces terse
- D. show interfaces summary
Answer: C
NEW QUESTION # 54
Which of these is true when the following command is issued?
ping interface ge-0/0/0 192.168.1.1 bypass-routing count 1000 rapid
- A. The bypass-routing parameter cannot be used on a ge interface.
- B. The bypass-routing parameter allows you to ping a host through an interface that has no route through it.
- C. The bypass-routing parameter allows you to ping a local WAN interface without generating any outbound traffic.
- D. The bypass-routing parameter is used to test the density on the line.
Answer: B
NEW QUESTION # 55
Referring to the exhibit, which statement is true?
- A. The customer's link flappedd within the last hour.
- B. The customer's link will failover in nine seconds.
- C. The customer has set the version parameter to automatic.
- D. The customer has not enabled security for BFD.
Answer: A
NEW QUESTION # 56
Which two features are implemented on the Packet Forwarding Engine? (Choose Two)
- A. Chassis Management
- B. Firewall Filters
- C. Routing protocol update
- D. Class of Service
Answer: B,D
NEW QUESTION # 57
You are troubleshooting an issue and want to monitor syslog in real time.
Which operational command accomplish this task?
- A. Monitor traffic interface fxp0.0
- B. Show log message
- C. Monitor start message
- D. Show log message | refresh i
Answer: C
NEW QUESTION # 58
Which of these route filter match type will match only prefixes greater than the defined prefix?
- A. upto
- B. longer
- C. orlonger
- D. exact
Answer: B
NEW QUESTION # 59
A user has entered the sequence of commands shown in the exhibit
At which level of the configuration hierarchy would the user be after typing the exit command?
- A. [edit]
- B. [edit interfaces]
- C. [edit interfaces ge-0/0/0 unit 01 ]
- D. [edit interfaces ge-0/0/0]
Answer: B
Explanation:
abc# edit interfaces
[edit interfaces]
abc# edit ge-0/0/1 unit 0 family inet
[edit interfaces ge-0/0/1 unit 0 family inet]
abc# exit
[edit interfaces]
NEW QUESTION # 60
What does the output of the show route forwarding-table command display?
- A. The routing protocol databases in the Routing Engine.
- B. The Packet Forwarding Engine routing table.
- C. The inactive entries in the Routing Engine's routing table.
- D. The Routing Engine's forwarding table.
Answer: D
NEW QUESTION # 61
......
The Juniper JN0-104 exam is an associate-level certification exam that aims to test the candidate's understanding of networking fundamentals and Junos OS. The exam consists of multiple-choice questions that cover a range of topics, including networking protocols, Junos OS fundamentals, and basic routing and switching concepts. Candidates are required to demonstrate their knowledge and skills in these areas to pass the exam.
Detailed New JN0-104 Exam Questions for Concept Clearance: https://www.testpassking.com/JN0-104-exam-testking-pass.html
JN0-104 Exam Preparation Material with New JN0-104 Dumps Questions.: https://drive.google.com/open?id=1HIbEc_wK-bKo7EbTs2NxIBceSammZ7tn