Avaya 71300X Test Engine Dumps Training With 70 Questions
71300X Questions Pass on Your First Attempt Dumps for Avaya-Certification Certified
NEW QUESTION 11
How many Server Flows and/or Subscriber Flows are required for SIP Trunking?
- A. a minimum of two Server Flows
- B. a minimum of two Subscriber Flows
- C. one Subscriber Flow and two Server Flows
- D. one Subscriber Flow and one Server Flow
Answer: C
Explanation:
Explanation
Two types of flows need to be defined for the proper routing of SIP messages from and to the endpoints and the SIP server.
Example, Server Flows:
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
540, 546
NEW QUESTION 12
What is the process for establishing a command line session to the AES Management IP Address, and logging in with the default account and default password?
- A. Use PuTTY to SSH to > AES Management IP Addr > using port 22, then enter login=craft password=crftpw.
- B. Use PuTTY to SSH to > AES Management IP Addr > using port 222, then enter login=admin password=admin01.
- C. Use PuTTY to SSH to > AES Management IP Addr > using port 22, then enter login=cust password=custpw.
- D. Use PuTTY to Rlogin to > AES Management IP Addr > using port 21, then enter login=admin password=admin.
Answer: A
Explanation:
Explanation
Use port 22, not port 21 or port 222.
Log in as craft and use the default password.
References: Application Enablement Services Installation and Upgrade Guide for a Bundled Server Release
4.0, page 29
https://downloads.avaya.com/elmodocs2/AES/4.0/02_300356_4.pdf
NEW QUESTION 13
An Avaya Aura Messaging (AAM) server intended to store Voice Messages in Avaya Message Store Mode, and you are configuring that server for integration with an Avaya Aura Core.
In Messaging Administration > Server Settings > Server Role/AxC Address, which Server Role must be chosen at the "Roles for this server" field?
- A. Application Only
- B. Storage & Application
- C. AMSM
- D. Storage Only
Answer: B
NEW QUESTION 14
Which statement describes Cross-Origin Resource Sharing (CORS)?
- A. It is a network setup by which an Avaya Aura Media Server (AAMS) can be used by more than one Avaya Aura Communications Manager (CM).
- B. It is a W3C specification that allows cross-domain communication from the browser.
- C. It allows for signaling-groups to be used by more than one trunk-group.
- D. It is making DSP resources available regardless of the originating location of a call.
Answer: B
Explanation:
Explanation
Cross-origin resource sharing (CORS) is a mechanism that allows restricted resources (e.g. fonts) on a web page to be requested from another domain outside the domain from which the first resource was served. A web page may freely embed cross-origin images, stylesheets, scripts, iframes, and videos.
Note on the History of CORS:
Cross-origin support was originally proposed by Matt Oshry, Brad Porter, and Michael Bodell of Tellme Networks in March 2004 for inclusion in VoiceXML 2.1 to allow safe cross-origin data requests by VoiceXML browsers.
In May 2006 the first W3C Working Draft was submitted. In March 2009 the draft was renamed to
"Cross-Origin Resource Sharing" and in January 2014 it was accepted as a W3C Recommendation.
References: https://en.wikipedia.org/wiki/Cross-origin_resource_sharing
NEW QUESTION 15
Which three steps are necessary to make a successful Implementation of Avaya BreezeTM WebRTC Snap-in?
(Choose three.)
- A. Busy and Release the WebRTC snap-in.
- B. Manually configure the WebLM IP address in the WebRTC configuration attributes.
- C. Load the Snap-in.
- D. Install the Snap-in.
- E. Download and Install WebRTC License file.
Answer: C,D,E
Explanation:
Explanation
Step 1: Download and install the license file
Procedure
0. Download the snap-in license file from PLDS.
1. On System Manager navigate to Home > Services > Licenses.
2. Select Install License.
3. Browse to the location of the snap-in license.
4. Select the license file and click Open.
5. Click Accept the License Terms & Conditions and click Install.
The system installs the license file.
In the left navigation pane, the system displays the snap-in under Licensed Products.
Step 2: Load the snap-in
Step 3: Install the snap-in
References: Avaya WebRTC Snap-in Reference, Release 3.1 (May 2016), page 15
https://downloads.avaya.com/css/P8/documents/101013939
NEW QUESTION 16
In which location is the AAMS URI '[email protected]' configured?
- A. Home > Elements > Breeze > Configuration > Avaya Aura Media Server and as a Regular Expression
- B. Home > Elements > Breeze > Configuration > Avaya Aura Media Server and as a Dial Pattern
- C. Elements > Breeze > Configuration > HTTP Security and as a Regular Expression
- D. Elements > Breeze > Configuration > HTTP Security and as a Dial Pattern
Answer: A
Explanation:
Explanation
Creating the Avaya Aura Media Server Routing Pattern
Procedure
1. On System Manager, click Elements > Routing > Routing Policies.
2. Click New.
3. Type a Name for the Routing Policy.
4. From the SIP Entity as Destination field, click Select.
5. Select the Avaya Aura
Media Server SIP Entity that you created.
Select the Local Host Name FQDN SIP Entity if you are using High Availability for the Avaya Aura Media Server routing.
6. Click Commit.
7. Navigate to Home > Elements > Routing > Regular Expressions and click New.
8. In the Pattern field, type ce-msml@<sip-domain>.*
This sip-domain value must match:
* The SIP domain that you entered in the Home > Elements > Routing > Domains page.
* The default SIP domain that you entered on the Avaya BreezeTM Cluster Administration page.
9. Click Commit
https://downloads.avaya.com/css/P8/documents/101014426
References: Deploying Avaya Breeze, Release 3.1, (September 2016), page 55
NEW QUESTION 17
In which two locations is the Switch Password configured?
- A. In 'ip-services' form on Avaya Aura Communication Manager (CM) and in 'TSAPI link' on Avaya Aura Application Enablement Services (AES)
- B. In 'cti-link' form on Avaya Aura Communication Manager (CM) and in 'TSAPI link' on Avaya Aura Application Enablement Services (AES)
- C. In 'ip-services' form on Avaya Aura Communication Manager (CM) and in 'Switch Connection' on Avaya Aura Application Enablement Services (AES)
- D. In 'cti-link' form on Avaya Aura Communication Manager (CM) and in 'Switch Connection' on Avaya Aura Application Enablement Services (AES)
Answer: C
Explanation:
Explanation
Enabling AE Services refers to administering the transport link between Communication Manager and AE Services.
Procedure
1. Type change ip-services. Communication Manager displays the IP SERVICES form
2. Complete Page 1 of the IP SERVICES form
3. Complete Page 3 of the IP SERVICES form as follows.
a. In the AE Services Server field, type the name of the AE Services server b. In the Password field, create a password.
This is the password that the AE Services administrator must set on the AE Server (Communication Manager Interface > Switch Connections > Edit Connection > Switch Password). The passwords must exactly match on both Communication Manager and the AE Services server.
References: Avaya Aura Application Enablement Services Administration and Maintenance Guide, Release
6.3 (June 2014) , page 26
https://downloads.avaya.com/css/P8/documents/100171737
NEW QUESTION 18
Which statement about enabling IM and Presence for a user is true?
- A. In SMGR, edit the Communication Profile of the user to assign an Avaya SIP handle and check the Presence profile checkbox.
- B. In SMGR, edit the Communication Profile of the user to assign an Avaya Presence/IM handle and check the Presence profile checkbox.
- C. In SMGR, edit the Communication Profile of the user to assign an Avaya E.164 handle and check the Presence profile checkbox.
- D. In SMGR, edit the Communication Profile of the user to assign a XMPP handle and check the Presence profile checkbox.
Answer: A
Explanation:
Explanation
Communication Profile tab: Presence Profile
Fields include:
* The SIP Entity field used to route SIP based messages through the Presence Services.
* IM Gateway The IP address of the IM gateway
Note: Avaya SMGR stands for Avaya System Manager.
References: Administering Avaya Aura System Manager for Release 6.3.11 and later, Release 6.3 November
2016, page 554
https://downloads.avaya.com/css/P8/documents/101008185
NEW QUESTION 19
After the initial provisioning script has been run you see your Avaya Session Border Controller for Enterprise (SBCE) displaying a Registered state in the Web GUI. You click on the install link in the EMS System Management > Devices menu to continue the installation.
After displaying a status of Provisioning for a short while, which status does the SBCE display?
- A. Busyout
- B. Maintenance-Busy
- C. Up
- D. Commissioned
Answer: D
Explanation:
Explanation
SBC states:
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
201
NEW QUESTION 20
To set Timers, URI Manipulation, and Header Manipulation that the Avaya Session Border Controller for Enterprise (SBCE) will use when signaling to the far-end server; a profile like "avaya-ru" is provided by default.
When configuring the Server Configuration, you must link to which type of Global profile?
- A. Topology Hiding
- B. Routing
- C. Server Interworking
- D. Signaling
Answer: C
Explanation:
Explanation
The standard Avaya profile "avaya-ru" is cloned for the Call Server Interworking Profile.
The Interworking function of the Global Profiles feature enables the SBCE to function in an enterprise VoIP network using different SIP protocols.
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
339
NEW QUESTION 21
A customer reports that when using Presence services, the users cannot see the Presence status.
Which two tools are used to trace a PUBLISH message. In the Avaya BreezeTM server? (Choose two.)
- A. tracePS
- B. traceSM
- C. traceSBC
- D. traceCE
- E. tracePRS
Answer: A,B
NEW QUESTION 22
If more than one Avaya BreezeTM node is available in the cluster, which statement about redundancy and load-balancing is true?
- A. The Cluster IP address is not used for Presence Services in 7.0. IM clients configure a FQDN instead of IP address which is resolved by a DNS server to all Avaya BreezeTM nodes in the cluster.
- B. IM clients point to any Avaya BreezeTM node SM100 IP address. The client is dynamically informed of alternate Avaya BreezeTM nodes in the cluster.
- C. IM clients point to the Leader Avaya BreezeTM node SM100 IP address which redirects the clients to a particular Avaya BreezeTM node based on load-balancing policy.
- D. The list of all Avaya BreezeTM nodes SM100 IP addresses must be configured in the client.
Answer: C
Explanation:
Explanation
Enable load balancing for a cluster if you want to scale the HTTP services without targeting a particular Avaya BreezeTM server. All the requests are sent to the cluster IP address. When you enable load balancing, two Avaya BreezeTM servers are chosen as the active and standby load balancing servers. The active load balancer distributes the HTTP requests to all the other servers in the cluster in a round robin fashion.
References: Administering Avaya Breeze, Release 3.1 (May 2016), page 16
https://downloads.avaya.com/css/P8/documents/101014143
NEW QUESTION 23
What are three ways of accessing Avaya Aura Application Enablement Services (AES) to perform administration? (Choose three.)
- A. with web access
- B. with remote access using SSH
- C. with an Open X.11 terminal window
- D. with remote access using Rlogin
- E. with local access using a system console
Answer: A,B,E
Explanation:
Explanation
B: You can use a Web browser to access the Application Enablement Services Management Console (AE Services Management Console).
DE: Administrators can access the AE Services Linux shell (command prompt) either locally using a system console or remotely using a secure shell (ssh) client. This access method applies primarily to AE Services Technicians (craft users) who perform specific tasks, such as viewing trace logs, installing patches, and so forth.
References: Avaya Aura Application Enablement Services Administration and Maintenance Guide , page 52
https://downloads.avaya.com/css/P8/documents/100171737
NEW QUESTION 24
In Avaya Session Border Controller for Enterprise (SBCE) 7.x, you need to download the 46xxsettings.txt file to a Remote Worker device.
What needs to be configured under DMZ Services > Relay Services?
- A. Application Relay
- B. Application Relay and File Transfer
- C. Application Relay and Reverse Proxy
- D. Reverse Proxy
Answer: A
Explanation:
Explanation
Relay Services are used to define how file transfers (e.g., for phone firmware upgrades and configuration), are routed to the Remote Worker endpoints.
Example: 2 For accessing the file server using HTTPS protocol
The following screenshot shows the newly created Relay Services
References: Configuring Remote Workers with Avaya Session Border Controller for Enterprise Rel. 6.2, Avaya Aura Communication Manager Rel. 6.3 and Avaya Aura Session Managers Rel. 6.3 - Issue 1.0, page 73
https://downloads.avaya.com/css/P8/documents/100183254
NEW QUESTION 25
WebRTC is used for which type of calls?
- A. calls originated from internal web browsers only
- B. calls originated from internal and external web browsers
- C. video calls only
- D. calls originated from external web browsers only
Answer: B
Explanation:
Explanation
The Avaya WebRTC Snap-in enables users inside or outside the Enterprise to make a secure call from their web browser to any endpoint to which Avaya Aura can deliver calls.
References: Avaya WebRTC Snap-in Reference, Release 3.1 (May 2016), page 6
https://downloads.avaya.com/css/P8/documents/101013939
NEW QUESTION 26
Which four kinds of services does the TSAPI standard provide for third-party call control over Avaya Aura Communication Manager (CM)? (Choose four.)
- A. adding new feature buttons to agent sets
- B. performing a remote reboot to the CM server
- C. invoking CM features
- D. controlling specific calls or stations
- E. completing the routing of incoming calls
- F. receiving notifications of events
Answer: C,D,E,F
Explanation:
Explanation
A: The services in the Event Report group provide a client application with the reports of events that cause a change in the state of a call, a connection, or a device.
B: The services in the call control group enable a telephony client application to control a call or connection on Communication Manager. Typical uses of these services are:
placing calls from a device
controlling a connection for a single call.
C: The services in the query group allow a client to query device features and static attributes of a Communication Manager device.
E: The services in the routing group allow Communication Manager to request and receive routing instructions for a call from a client application.
References: Avaya Aura Application Enablement Services TSAPI for Avaya Communication Manager Programmer's Reference Release 6.1, page 128
https://downloads.avaya.com/css/P8/documents/100141354
NEW QUESTION 27
The WebRTC snap-in needs to be loaded on which of Avaya BreezeTM cluster?
- A. Work Assignment EDP Cluster
- B. Context Store EDP Cluster
- C. Core Platform EDP Cluster
- D. General Purpose EDP Cluster
Answer: C
Explanation:
Explanation
A cluster profile is a pre-loaded template that contains cluster attributes.
The Core Platform cluster profile: A closed cluster that supports up to 10 Avaya Breeze servers.
NEW QUESTION 28
In the Avaya Session Border Controller for Enterprise (SBCE), before a traffic carrying Network Interface (A1 or B1) can be pinged, to which state do you have to toggle the status on Device Specific Settings > Network Management / Interfaces?
- A. Accept Service
- B. In-Service
- C. Enabled
- D. Active
Answer: C
Explanation:
Explanation
Commission the SBC-SBC Configuration
3. Click the Toggle link for both the A1 and the B1 interfaces.
The Administrative Status for both A1 and B1 changes to Enabled:
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
203
NEW QUESTION 29
On Avaya Session Border Controller for Enterprise (SBCE), which two ways can be used to view System Logs? (Choose two.)
- A. from CLI execute cat > var > log > Avaya > syslog
- B. from CLI execute cat archive > syslog > ipcs.log
- C. from System Manager web GUI > Alarms and Events
- D. from EMS web GUI SBCE Dashboard access Logs > System Logs
Answer: B,D
Explanation:
Explanation
C: Call Trace data are written to this location:
- /archive/syslog/ipcs/octeon.log
D: Viewing system logsProcedure
1. Log on to the EMS web interface with administrator credentials.
2. Select the Logs option from the toolbar, and click the System Logs menu.
The system displays the Syslog Viewer screen. On this screen, you can specify criteria in the Query Options section to filter the results displayed.
3. In the Start Date and End Date fields, filter the results displayed in a search report to fall within starting and ending dates and times. In previous Avaya SBCE Syslog Viewer windows, there were four separate fields:
Start Date, Start Time, End Date, and End Time.
References: Troubleshooting and Maintaining Avaya Session Border Controller for Enterprise (December
2015), page 21
Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page 478
NEW QUESTION 30
What should be verified before running the initTM -f command on the Command Line Interface of Avaya BreezeTM platform (formerly known as Engagement Development Platform (EDP))?
- A. Verify that an enrollment password is configured on System Manager and that it has not expired.
- B. Verify that Avaya BreezeTM is configured as a Managed Element in Avaya Aura System Manager.
- C. Verify that Avaya BreezeTM is licensed.
- D. Verify that a valid Certificate is installed on the Avaya BreezeTM instance.
Answer: A
Explanation:
Explanation
See step 8 and step 9 below.
Repairing replication between Avaya BreezeTM and System Manager
Procedure
1. On the System Manager web console, navigate to Services > Replication.
2. In Replica Group column, click CollaborationEnvironment_3.1.
3. In Replica Node Host Name column, locate Avaya BreezeTM.
4. Verify that the status of the Synchronization Status field is green. If not, go to Step 5.
5. If Presence Services Snap-in has been deployed, in the Product column, verify that both Avaya BreezeTM and Presence Services are displayed.
6. Select Avaya BreezeTM, and click Repair.
7. After 2-15 minutes, verify that the status of the Synchronization Status field is green. If not, go to Step 8.
8. Verify that Enrollment Password is not expired.
a. Navigate to Services > Security.
b. In the navigation pane, click Certificates > Enrollment Password.
9. If the Enrollment Password is expired:
a. Enter a password, and click Commit.
It is highly recommended that the same password must be used. Otherwise, Avaya BreezeTM and Presence Services must be re-administered, because System Manager Enrollment Password was configured during deployment of Avaya BreezeTM.
b. Open an SSH session to the Avaya BreezeTM Management Module IP address as sroot.
c. On the command line interface, enter initTM -f.
d. When prompted for the enrollment password, enter the password that you provided in Step 9a.
e. Repeat Step 1 to Step 6.
References: Avaya Aura Presence Services Snap-in Reference, Release 7.0.1 (December 2016), page 223
https://downloads.avaya.com/css/P8/documents/101013646
NEW QUESTION 31
Which statement about WebRTC and Media Resources is true?
- A. WebRTC uses its own embedded proprietary technology to handle and process Media Packets.
- B. WebRTC does not use any Media Resources since it only handles Text-Chat sessions.
- C. WebRTC uses Media Resources from a Hard-Based Media Gateway controlled by Avaya Aura Communication Manager (CM).
- D. WebRTC relies on the Avaya Aura Media Server (AAMS) to convert the WebRTC media stream to a SIP media stream.
Answer: D
Explanation:
Explanation
The Avaya Media Server can translate WebRTC media into a SIP media stream.
References:
http://www.avaya.com/blogs/archives/2014/10/an-introduction-to-the-avaya-webrtc-snap-in.html
NEW QUESTION 32
Which Avaya BreezeTM Cluster type is the Avaya Aura Presence Services snap-in installed on?
- A. General Purpose
- B. IM_Presence
- C. Presence Services
- D. Core Platform
Answer: D
Explanation:
Explanation
Verifying that Presence Services snap-in is ready to support Presence and IM Procedure
1. On the System Manager web console, navigate to Elements > Avaya Breeze> Cluster Administration.
2. Locate the row for the cluster, and verify that:
* The Cluster Profile field shows Core Platform.
etc.
References: Avaya Aura Presence Services Snap-in Reference. Release 7.0.1 (December 2016), page 224
https://downloads.avaya.com/css/P8/documents/101013646
NEW QUESTION 33
......
71300X Practice Test Pdf Exam Material: https://www.testpassking.com/71300X-exam-testking-pass.html