[Dec-2021] 300-710 Braindumps – 300-710 Questions to Get Better Grades
300-710 Exam Dumps - Try Best 300-710 Exam Questions - TestPassKing
NEW QUESTION 45
Refer to the exhibit.
An organization has an access control rule with the intention of sending all social media traffic for inspection After using the rule for some time, the administrator notices that the traffic is not being inspected, but is being automatically allowed What must be done to address this issue?
- A. Modify the selected application within the rule
- B. Change the intrusion policy to connectivity over security.
- C. Modify the rule action from trust to allow
- D. Add the social network URLs to the block list
Answer: A
NEW QUESTION 46
What is the benefit of selecting the trace option for packet capture?
- A. The option indicates whether the packet was dropped or successful.
- B. The option limits the number of packets that are captured.
- C. The option indicated whether the destination host responds through a different path.
- D. The option captures details of each packet.
Answer: B
Explanation:
Section: Management and Troubleshooting
Explanation/Reference:
NEW QUESTION 47
When deploying a Cisco ASA Firepower module, an organization wants to evaluate the contents of the traffic without affecting the network. It is currently configured to have more than one instance of the same device on the physical appliance Which deployment mode meets the needs of the organization?
- A. inline mode
- B. passive monitor-only mode
- C. inline tap monitor-only mode
- D. passive tap monitor-only mode
Answer: B
NEW QUESTION 48
What is the difference between inline and inline tap on Cisco Firepower?
- A. Inline mode can drop malicious traffic.
- B. Inline tap mode can send a copy of the traffic to another device.
- C. Inline tap mode does full packet capture.
- D. Inline mode cannot do SSL decryption.
Answer: A
NEW QUESTION 49
An organization has a Cisco FTD that uses bridge groups to pass traffic from the inside interfaces to the outside interfaces. They are unable to gather information about neighbouring Cisco devices or use multicast in their environment. What must be done to resolve this issue?
- A. Change the firewall mode to routed.
- B. Create a bridge group with the firewall interfaces.
- C. Create a firewall rule to allow CDP traffic.
- D. Change the firewall mode to transparent.
Answer: A
NEW QUESTION 50
After deploying a network-monitoring tool to manage and monitor networking devices in your organization, you realize that you need to manually upload an MIB for the Cisco FMC. In which folder should you upload the MIB file?
- A. /etc/sf/DCMIB.ALERT
- B. /sf/etc/DCEALERT.MIB
- C. /etc/sf/DCEALERT.MIB
- D. system/etc/DCEALERT.MIB
Answer: C
NEW QUESTION 51
Which command is typed at the CLI on the primary Cisco FTD unit to temporarily stop running high- availability?
- A. configure high-availability disable
- B. system support network-options
- C. configure high-availability resume
- D. configure high-availability suspend
Answer: A
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/610/configuration/guide/fpmc-config-guide-v61/firepower_threat_defense_high_availability.html
NEW QUESTION 52
Within Cisco Firepower Management Center, where does a user add or modify widgets?
- A. summary tool
- B. dashboard
- C. context explorer
- D. reporting
Answer: B
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide- v60/Using_Dashboards.html
NEW QUESTION 53
Which Cisco Advanced Malware Protection for Endpoints policy is used only for monitoring endpoint actively?
- A. triage
- B. Windows domain controller
- C. audit
- D. protection
Answer: C
NEW QUESTION 54
An engineer is troubleshooting a device that cannot connect to a web server. The connection is initiated from the Cisco FTD inside interface and attempting to reach 10.0.1.100 over the non-standard port of 9443 The host the engineer is attempting the connection from is at the IP address of 10.20.10.20. In order to determine what is happening to the packets on the network, the engineer decides to use the FTD packet capture tool Which capture configuration should be used to gather the information needed to troubleshoot this issue?
A)
B)
C)
D)
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: D
NEW QUESTION 55
A network engineer is receiving reports of users randomly getting disconnected from their corporate applications which traverses the data center FTD appliance Network monitoring tools show that the FTD appliance utilization is peaking above 90% of total capacity. What must be done in order to further analyze this issue?
- A. Use the Packet Analysis feature for capturing network data
- B. Use the Packet Export feature to save data onto external drives
- C. Use the Packet Tracer feature for traffic policy analysis
- D. Use the Packet Capture feature to collect real-time network traffic
Answer: D
NEW QUESTION 56
Refer to the exhibit.
And engineer is analyzing the Attacks Risk Report and finds that there are over 300 instances of new operating systems being seen on the network How is the Firepower configuration updated to protect these new operating systems?
- A. The administrator requests a Remediation Recommendation Report from Cisco Firepower
- B. Cisco Firepower gives recommendations to update the policies.
- C. Cisco Firepower automatically updates the policies.
- D. The administrator manually updates the policies.
Answer: B
Explanation:
Explanation
Ref:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Tailori
NEW QUESTION 57
An engineer is investigating connectivity problems on Cisco Firepower that is using service group tags.
Specific devices are not being tagged correctly, which is preventing clients from using the proper policies when going through the firewall How is this issue resolved?
- A. Use traceroute with advanced options.
- B. Use a packet sniffer with correct filtering
- C. Use a packet capture with match criteria.
- D. Use Wireshark with an IP subnet filter.
Answer: A
NEW QUESTION 58
Which two routing options are valid with Cisco Firepower Threat Defense? (Choose two.)
- A. ECMP with up to three equal cost paths across a single interface
- B. BGPv4 in transparent firewall mode
- C. ECMP with up to three equal cost paths across multiple interfaces
- D. BGPv4 with nonstop forwarding
- E. BGPv6
Answer: A,E
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/601/configuration/guide/fpmc-config-guide-v601/fpmc-config-guide-v60_chapter_01100011.html#ID-2101-0000000e
NEW QUESTION 59
Which two conditions are necessary for high availability to function between two Cisco FTD devices? (Choose two.)
- A. The units must be the same version
- B. The units must be different models if they are part of the same series.
- C. The units must be the same model.
- D. Both devices can be part of a different group that must be in the same domain when configured within the FMC.
- E. The units must be configured only for firewall routed mode.
Answer: A,C
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/firepower-management-center/212699- configure-ftd-high-availability-on-firep.html
NEW QUESTION 60
An administrator is working on a migration from Cisco ASA to the Cisco FTD appliance and needs to test the rules without disrupting the traffic. Which policy type should be used to configure the ASA rules during this phase of the migration?
- A. identity
- B. Prefilter
- C. Access Control
- D. Intrusion
Answer: C
NEW QUESTION 61
Which two statements about deleting and re-adding a device to Cisco FMC are true? (Choose two.)
- A. Before re-adding the device in Cisco FMC, you must add the manager back in the device.
- B. An option to re-apply NAT and VPN policies during registration is available, so users do not need to re- apply the policies after registration is completed.
- C. No option to delete and re-add a device is available in the Cisco FMC web interface.
- D. No option to re-apply NAT and VPN policies during registration is available, so users need to re-apply the policies after registration is completed.
- E. The Cisco FMC web interface prompts users to re-apply access control policies.
Answer: D,E
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide- v60/Device_Management_Basics.html
NEW QUESTION 62
Which command should be used on the Cisco FTD CLI to capture all the packets that hit an interface?
- A. capture
- B. capture WORD
- C. configure coredump packet-engine enable
- D. capture-traffic
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/command_ref/ b_Command_Reference_for_Firepower_Threat_Defense/ac_1.html
NEW QUESTION 63
An organization is using a Cisco FTD and Cisco ISE to perform identity-based access controls. A network administrator is analyzing the Cisco FTD events and notices that unknown user traffic is being allowed through the firewall. How should this be addressed to block the traffic while allowing legitimate user traffic?
- A. Modify lhe Cisco ISE authorization policy to deny this access to the user.
- B. Add the unknown user in the Access Control Policy in Cisco FTD.
- C. Modify Cisco ISE to send only legitimate usernames to the Cisco FTD.
- D. Add the unknown user in the Malware & File Policy in Cisco FTD.
Answer: B
NEW QUESTION 64
Which two routing options are valid with Cisco Firepower Threat Defense? (Choose two.)
- A. ECMP with up to three equal cost paths across a single interface
- B. BGPv4 in transparent firewall mode
- C. ECMP with up to three equal cost paths across multiple interfaces
- D. BGPv4 with nonstop forwarding
- E. BGPv6
Answer: A,E
NEW QUESTION 65
......
Preparation Phase
Career Prospects
The professionals can improve their career possibilities by obtaining the certificate. With the CCNP Security certification, there are many career opportunities that the individuals can explore. Some of the available positions include an IT Security Consultant, a Senior Network Engineers, a Cybersecurity Specialist, an Infrastructure Engineer, a Network Security Specialist, a Network Security Engineer, a Network Specialist, and a Network Administrator, among others. The average remuneration outlook for the certificate holders is $100,000 per year.
Verified 300-710 exam dumps Q&As with Correct 145 Questions and Answers: https://www.testpassking.com/300-710-exam-testking-pass.html
Get New 300-710 Certification – Valid Exam Dumps Questions: https://drive.google.com/open?id=1vai55ojzfvYWPrqWqCXpyUL28dr2_4aX