Quickly and Easily Pass HP Exam with HPE7-A01 real Dumps Updated on Aug-2024 [Q35-Q50]

Share

Quickly and Easily Pass HP Exam with HPE7-A01 real Dumps Updated on Aug-2024

Realistic HPE7-A01 Dumps Questions To Gain Brilliant Result


HP HPE7-A01 exam, also known as the Aruba Certified Campus Access Professional exam, is designed to test an individual’s knowledge and skills in implementing and managing enterprise-level wireless networks. Aruba Certified Campus Access Professional Exam certification is ideal for individuals who work in IT departments or those who are planning to pursue a career in networking. The HPE7-A01 exam is designed to assess an individual’s ability to plan, design, implement, and manage complex wireless networks using Aruba technology.

 

NEW QUESTION # 35
Match the terms below to their characteristics (Options may be used more than once or not at all.)

Answer:

Explanation:

Reference:
The terms broadcast, IP directed broadcast, multicast, and unicast are different types of communication or data transmission over a network. They differ in how many devices are involved in the communication and how they address the messages. The following table summarizes the characteristics of each term1:


NEW QUESTION # 36
Your customer has an Aruba CX 6200F VSF stack with two switches. A third member (JL726A) needs to be added to the VSF configuration. What e the configuration that enables the new devices to join the VSF?

  • A.
  • B.
  • C.
  • D.

Answer: D

Explanation:
According to the Aruba Documentation Portal1, the Aruba CX 6200F VSF stack is a feature that allows you to create a virtual switching framework (VSF) with up to eight members that can be managed as a single logical device. The VSF stack provides benefits such as load balancing, failover, redundancy, and security.
To add a new device to the VSF stack, you need to configure the device with the VSF command vsf member and specify the type, link, and secondary-member information. The type of the new device can be one of the following: JL726A, JL726B, JL726C, or JL726D. The link is the interface that connects the new device to the existing VSF members. The secondary-member is an optional parameter that specifies which member will act as a backup in case of a failure.
1: https://www.arubanetworks.com/techdocs/AOS-CX/10.06/HTML/5200-7726/index.html 2: https://buy.hpe.com/us/en/networking/switches/fixed-port-l3-managed-ethernet-switches/6000-switch-products/aruba-6200f-48g-4sfp-switch/p/jl726a 3: https://addin.co.th/shop/switch/aruba-switch/6200f-series/jl726a/


NEW QUESTION # 37
A network administrator is attempting to troubleshoot a connectivity issue between a group of users and a particular server The administrator needs to examine the packets over a period of time from their desktop; however, the administrator is not directly connected to the AOS-CX switch involved with the traffic flow.
What statements are correct regarding the ERSPAN session that needs to be established on an AOS-CX switch'? (Select two )

  • A. On the source AOS-CX switch, the destination specified is the switch to which the administrator's desktop is connected
  • B. On the source AOS-CX switch, the destination specified is the administrators desktop
  • C. The encapsulation protocol is UDP.
  • D. The encapsulation protocol used is VXLAN.
  • E. The encapsulation protocol used is GRE.

Answer: B,E

Explanation:
Explanation
These are the correct statements regarding the ERSPAN session that needs to be established on an AOS-CX switch for a network administrator to examine the packets over a period of time from their desktop. ERSPAN (Encapsulated Remote Switched Port Analyzer) is a feature that allows an AOS-CX switch to mirror traffic from one or more source ports or VLANs to a remote destination IP address over a GRE (Generic Routing Encapsulation) tunnel. The destination IP address must be the IP address of the administrator's desktop, which must have a packet capture tool installed to receive and analyze the mirrored traffic. The encapsulation protocol used for ERSPAN is GRE, which adds a header to the mirrored packets with information such as source and destination IP addresses, session ID, etc. The other statements are incorrect because they either do not specify the correct destination IP address or do not use ERSPAN or GRE. References:
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch02.html
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch03.html


NEW QUESTION # 38
You are building a configuration in Central that will be used for a standardized network design for small sites for your company, you want to use GUI configuration for gateways and Aps, while template configuration for switches. You need to align with Aruba best practices.
Which set of actions will satisfy these requirements?

  • A. Create one group in Central for switches and a second group for APs and gateways. Create a unique site for each location, and assign devices to the appropriate site.
  • B. Create a single group in Central. Create a unique site for each type of device, and assign devices to the appropriate site.
  • C. Create one group in Central for switches a second group for APs. and a third group for gateways Create a unique site for each location, and assign devices to the appropriate site.
  • D. Create a single group in Central. Create a unique site for each location, and assign devices to the appropriate site.

Answer: D

Explanation:
This is because option C shows how to create a single group in Central with different configuration methods defined for each device type. For example, you can create a group with the name Group1, and within this group, you can enable template-based configuration method for switches and UI-based configuration method for Instant APs and Gateways. Aruba Central identifies both these groups under a single name (Group1). If a device type in the group is marked for template-based configuration method, the group name is prefixed with TG (TG Group1). You can use Group1 as the group ID for workflows such as user management, monitoring, reports, and audit trail2.
https://www.arubanetworks.com/techdocs/central/latest/content/nms/groups/abt-groups.htm 2: https://www.arubanetworks.com/techdocs/central/latest/content/nms/groups/groups.htm


NEW QUESTION # 39
Refer to Exhibit:

With Access-1, What needs to be identically configured With MSTP to load-balance VLANS?

  • A. Spanning-tree instance vlan mapppjng
  • B. spanning-tree Cist mapping
  • C. Spanning-tree root-guard setting
  • D. Spanning-tree bpdu-guard setting

Answer: A

Explanation:
Explanation
The correct answer is B. Spanning-tree instance VLAN mapping.
To load-balance VLANs with MSTP, you need to configure the same VLAN-to-instance mapping on all switches in the same MST region. This means that you need to assign different VLANs to different MST instances, and then adjust the spanning tree parameters (such as priority, cost, or port role) for each instance to achieve the desired load balancing. For example, you can make one switch the root for instance 1 and another switch the root for instance 2, and then map half of the VLANs to instance 1 and the other half to instance 2.
According to the Cisco document Understand the Multiple Spanning Tree Protocol (802.1s), one of the steps to configure MST is:
Split your set of VLANs into more instances and configure different MST settings for each of these instances. In order to easily achieve this, elect Bridge D1 to be the root for VLANs 501 through 1000, and Bridge D2 to be the root for VLANs 1 through 500. These statements are true for this configuration:
Switch D1(config)#spanning-tree mst configuration
Switch D1(config-mst)#instance 1 vlan 501-1000
Switch D1(config-mst)#exit
Switch D1(config)#spanning-tree mst 1 priority 0
Switch D2(config)#spanning-tree mst configuration
Switch D2(config-mst)#instance 2 vlan 1-500
Switch D2(config-mst)#exit
Switch D2(config)#spanning-tree mst 2 priority 0
The above commands create two MST instances, 1 and 2, and map VLANs 501-1000 to instance 1 and VLANs 1-500 to instance 2. Then, they make switch D1 the root for instance 1 and switch D2 the root for instance 2.
The other options are incorrect because:
A: Spanning-tree bpdu-guard setting is a security feature that disables a port if it receives a BPDU from an unauthorized device. It does not affect load balancing with MSTP.
C: Spanning-tree CIST mapping is not a valid command. CIST stands for Common and Internal Spanning Tree, which is the spanning tree instance that runs within an MST region and interacts with other regions or non-MST switches.
D: Spanning-tree root-guard setting is another security feature that prevents a port from becoming a root port if it receives superior BPDUs from another switch. It does not affect load balancing with MSTP.


NEW QUESTION # 40
Which method is used to onboard a new UXI in an existing environment with 802 1X authentication? (The sensor has no cellular connection)

  • A. Use the Aruba installer app on your smartphone to scan the barcode
  • B. Use the UXI app on your smartphone and connect the UXI via Bluetooth
  • C. Use the CLI via the serial cable and adjust the initial configuration.
  • D. Connect the new UXI from an already installed one and adjust the initial configuration.

Answer: B

Explanation:
Explanation
To onboard a new UXI in an existing environment with 802.1X authentication, you need to use the UXI app on your smartphone and connect the UXI via Bluetooth. The UXI app allows you to scan the QR code on the UXI sensor and configure its network settings, such as SSID, password, IP address, etc. The Bluetooth connection allows you to communicate with the UXI sensor without requiring any network access or cellular connection. The other options are incorrect because they either do not use the UXI app or do not use Bluetooth. References:
https://www.arubanetworks.com/products/network-management-operations/analytics-monitoring/user-experienc
https://help.centralon-prem.arubanetworks.com/2.5.4/documentation/online_help/content/nms-on-prem/aos-cx/g


NEW QUESTION # 41
Your customer is interested in hearing more about how roles can help keep consistent policy enforcement in a distributed overlay fabric How would you explain this concept to them''

  • A. Group Based Policy ID is applied on egress VTEP after device authentication and policy is enforced on ingress VTEP
  • B. Role-based policies enhance User Based Tunneling across the campus network and the policy traffic is protected with iPsec
  • C. Group Based Policy ID is applied on ingress VTEP after device authentication and policy is enforced on egress VTEP
  • D. Role-based policies are tied to IP addresses which have an advantage over IP-based policies and role names are sent between VTEPs

Answer: C

Explanation:
Explanation
This is the correct explanation of how roles can help keep consistent policy enforcement in a distributed overlay fabric. Roles are used to assign group based policy IDs (GBPs) to devices after they authenticate with ClearPass or a local database. GBPs are then used to tag the traffic from the devices and send them to the ingress VTEP, which applies the GBP on the VXLAN header. The egress VTEP then enforces the policy based on the GBP and the destination device. The other options are incorrect because they either do not describe the correct sequence of events or do not use the correct terms. References:
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch03.html
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch05.html


NEW QUESTION # 42
With the Aruba CX switch configuration, what is the Active Gateway feature that is used for and is unique to VSX configuration?

  • A. VRRP and Active gateway are mutually exclusive on a VLAN
  • B. VRID is set automatically as SVI vlan id
  • C. VRRP and Active Gateway can be configured on a single VLAN for interoperability
  • D. VRIDs need to be non-overlapping with VRRP

Answer: A

Explanation:
Active gateway is a first hop redundancy protocol that eliminates a single point of failure. The active gateway feature is used to increase the availability of the default gateway servicing hosts on the same subnet. An active gateway improves the reliability and performance of the host network by enabling a virtual router to act as the default gateway for that network. If you have enabled active gateway, VRRP is not required3. Active gateway is similar to VRRP in that routed traffic from the VSX node is sourced from the switch interface MAC and not the virtual MAC address (VMAC). Each active gateway sends a periodic broadcast hello packet to avoid VMAC aging on the access switches. The switch views the active gateway IP as a self IP address3. Active gateway is preferable over VRRP because with VRRP traffic is still pushed over the ISL link, resulting in latency in the network3. Therefore, VRRP and active gateway are mutually exclusive on a VLAN, and answer A is correct.


NEW QUESTION # 43
A network engineer recently identified that a wired device connected to a CX Switch is misbehaving on the network To address this issue, a new ClearPass policy has been put in place to prevent this device from connecting to the network again.
Which steps need to be implemented to allow ClearPass to perform a CoA and change the access for this wired device? (Select two.)

  • A. Bounce the switchport
  • B. Use Dynamic Segmentation.
  • C. Confirm that NTP is configured on the switch and ClearPass
  • D. Configure dynamic authorization on the switch.
  • E. Configure dynamic authorization on the switchport

Answer: A,D

Explanation:
Explanation
CoA (Change of Authorization) is a feature that allows ClearPass to dynamically change the authorization and access privileges of a device after it has been authenticated1. CoA uses RADIUS messages to communicate with the network device and instruct it to perform an action, such as reauthenticating the device, applying a new VLAN or user role, or disconnecting the device2.
To enable CoA on a CX switch, the network engineer needs to configure dynamic authorization on the switch, which is a global command that allows the switch to accept RADIUS messages from ClearPass and execute the requested actions3. The network engineer also needs to specify the IP address and shared secret of ClearPass as a dynamic authorization client on the switch3.
To trigger CoA for a specific wired device, the network engineer needs to bounce the switchport, which is an action that temporarily disables and re-enables the port where the device is connected. This forces the device to reauthenticate and receive the new policy from ClearPass. Bouncing the switchport can be done manually by using the interface shutdown and no shutdown commands, or automatically by using ClearPass as a CoA server and sending a RADIUS message with the Port-Bounce-Host AVP (Attribute-Value Pair).


NEW QUESTION # 44
Which feature supported by SNMPv3 provides an advantage over SNMPv2c?

  • A. Community strings
  • B. GetBulk
  • C. Encryption
  • D. Transport mapping

Answer: C

Explanation:
Explanation
Encryption is a feature supported by SNMPv3 that provides an advantage over SNMPv2c. Encryption protects the confidentiality and integrity of SNMP messages by encrypting them with a secret key. SNMPv2c does not support encryption and relies on community strings for authentication and authorization, which are transmitted in clear text and can be easily intercepted or spoofed. Transport mapping, community strings, and GetBulk are features that are common to both SNMPv2c and SNMPv3. References:
https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/snmp/snmp.htm
https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/snmp/snmpv3.htm


NEW QUESTION # 45
A customer has a large number of food-producing machines
* All machines are connected via Aruba CX6200 switches in VLANs 100.110. and 120
* Several external technicians are maintaining this special equipment
What are the correct commands to ensure that no rogue DHCP server will impact the network?

  • A.
  • B.
  • C.
  • D.

Answer: C

Explanation:
Explanation
Option A shows the correct commands to ensure that no rogue DHCP server will impact the network. The commands include the following steps:
* Enable DHCP snooping on the switch. DHCP snooping is a feature that prevents rogue DHCP servers from offering IP addresses to clients by filtering DHCP messages based on trusted and untrusted ports1.
* Configure VLANs 100, 110, and 120 as DHCP snooping VLANs. This means that DHCP snooping will be applied to these VLANs and any untrusted DHCP messages received on these VLANs will be dropped1.
* Configure LAG 1 as a trusted port for DHCP snooping. This means that any DHCP messages received on LAG 1 will be allowed and not filtered by DHCP snooping. LAG 1 is assumed to be connected to a legitimate DHCP server or a router that relays DHCP requests to a legitimate DHCP server1.
Option B is incorrect because it does not enable DHCP snooping on the switch or configure VLANs 100, 110, and 120 as DHCP snooping VLANs. Option C is incorrect because it does not configure LAG 1 as a trusted port for DHCP snooping. Option D is incorrect because it does not enable DHCP snooping on the switch or configure LAG 1 as a trusted port for DHCP snooping. References: 1
https://techhub.hpe.com/eginfolib/Aruba/OS-CX_10.04/5200-6692/GUID-BD3E0A5F-FE4C-4B9B-BE1D-FE7


NEW QUESTION # 46
When configuring UBT on a switch what will happen when a gateway role is not specified?

  • A. The gateway will assign a default role to the client
  • B. The gateway will send back the deny role to the client.
  • C. The switch will assign the default deny role to the client.
  • D. The switch will put the client on the access VLAN

Answer: D

Explanation:
Explanation
According to the Aruba Documentation Portal1, user-based tunneling (UBT) is a feature that uses GRE to tunnel ingress traffic on a switch interface to a gateway for further processing. UBT enables a switch to provide a centralized security policy, using per-user authentication and access control to ensure consistent access and permissions.
Option A: The switch will put the client on the access VLAN
This is because option A shows how UBT works on an Aruba switch. When a device connects to the network, it is authenticated using either MAC Authentication or 802.1X and triggers an enforcement policy from ClearPass, which contains an enforcement profile with a user role configuration. The user role can be assigned locally on the switch or on ClearPass as part of an enforcement profile. The user role determines the VLAN that the device belongs to and the access policies that apply to it23.
Therefore, option A is correct.
1: https://www.arubanetworks.com/techdocs/central/latest/content/nms/aos-cx/cfg/conf-cx-ubt.htm 2:
https://www.arubanetworks.com/techdocs/AOS-CX/10.06/HTML/5200-7696/GUID-581D2976-694B-46C7-849
https://community.arubanetworks.com/viewdocument/?DocumentKey=c740df4e-3e26-4cc5-9126-355a18709c4


NEW QUESTION # 47
What is an Aruba-recommended best practice for hardening that only applies to Aruba CX 6300 series switches with dedicated management ports?

  • A. Create a dedicated management VRF, and assign the management port to it.
  • B. Disable all management services on the default VRF.
  • C. Manually enable Enhanced Security Mode from a console session.
  • D. Implement a control plane ACL to limit access to approved IPs and/or subnets

Answer: A

Explanation:
This is an Aruba-recommended best practice for hardening that only applies to Aruba CX 6300 series switches with dedicated management ports. A dedicated management port is a physical port that is used exclusively for out-of-band management access to the switch. A dedicated management VRF is a virtual routing and forwarding instance that isolates the management traffic from other traffic on the switch. By creating a dedicated management VRF and assigning the management port to it, the administrator can enhance the security and performance of the management access to the switch. The other options are incorrect because they either do not apply to switches with dedicated management ports or do not follow Aruba-recommended best practices. Reference: https://www.arubanetworks.com/assets/ds/DS_AOS-CX.pdf https://www.arubanetworks.com/assets/tg/TB_ArubaCX_Switching.pdf


NEW QUESTION # 48
You are configuring an SVI on an Aruba CX switch that needs to have the following characteristics:
* VLANID = 25
. IPv4 address 10 105 43 1 with mask 255 255 255.0
* IPv6 address fd00:5708::f02d:4df6 with a 64 bit prefix length
* member of VRF eng
* VRF eng and VLAN 25 have not yet been created
Which command lists will satisfy the requirements with the least number of commands?

  • A.
  • B.
  • C.
  • D.

Answer: D

Explanation:
Explanation
The other options either use more commands or do not create the VRF or the VLAN.
Option C uses the following commands:
vrf eng: This command creates a VRF named eng and enters the VRF configuration mode1.
vlan 25: This command creates a VLAN with ID 25 and enters the VLAN configuration mode2.
interface vlan 25: This command creates an SVI on VLAN 25 and enters the interface configuration mode3.
ip address 10.105.43.1/24 ipv6 address fd00:5780::102d:4df6/64 vrf attach eng: This command assigns an IPv4 address of 10.105.43.1 with a subnet mask of 255.255.255.0 and an IPv6 address of fd00:5780::102d:4df6 with a prefix length of 64 to the SVI, and attaches it to the VRF eng.


NEW QUESTION # 49
Which component is used by the Aruba Network Analytics Engine (NAE)?

  • A. JSON-based scripts
  • B. Lisp-based agents
  • C. Current State Database
  • D. Ruby-based scripts

Answer: A

Explanation:
Explanation
JSON-based scripts are the components used by the Aruba Network Analytics Engine (NAE). NAE is a feature that provides network monitoring and troubleshooting capabilities using JSON-based scripts called agents. Agents collect data from various sources, such as switch CLI commands, SNMP queries, REST APIs, etc., and analyze them using predefined rules and thresholds. Agents can also generate alerts, notifications, actions, or reports based on the analysis results. References:
https://www.arubanetworks.com/techdocs/AOS-CX_10_08/UG/bk01-ch07.html
https://www.arubanetworks.com/techdocs/AOS-CX_10_08/UG/bk01-ch08.html


NEW QUESTION # 50
......

Start your HPE7-A01 Exam Questions Preparation: https://www.testpassking.com/HPE7-A01-exam-testking-pass.html

A Fully Updated HPE7-A01 Exam Dumps - PDF Questions and Testing Engine: https://drive.google.com/open?id=1fn1QuyJUSVjO7ypcboK261ooRid3Q9IQ