Cisco 200-401 Exam Topics:
| Section | Weight | Objectives |
|---|---|---|
| Maintain Appropriate End-Devices and Industrial Network Infrastructure Devices | 17% | -Given a scenario, ensure reliable back-ups of current configuration are being made -Given a scenario, verify that the appropriate firmware is loaded to support the system -Demonstrate an understanding of the importance of maintaining updated firmware to minimize security holes -Demonstrate an understanding of appropriate techniques to upload software to a Cisco IOS networking device -Provided a deployed asset inventory database illustrate an understanding of appropriate methods for updating and/or maintaining the database (hardware, operating system and patch level, which people have access to different systems) -Demonstrate an understanding of the conditions that cause deterioration of equipment (cables, devices, etc.) as related to industrial environments -As part of the change management process identify the relevant documentation artifacts to be maintained for all stakeholders |
| Install, Replace, and/or Remove an Infrastructure Device | 23% | -Demonstrate a knowledge of how different industrial application/network protocols operate within the network topology (Ethernet/IP, 61850, etc.) -Demonstrate familiarity with basic CLI/GUI configuration within an industrial network by accessing, configuring, saving, validating (ports, IP address, connectivity, subnet mask, default gateway) and exiting a network device -Demonstrate understanding of safe physical installation of various industrial ruggedized network devices within an industrial setting, (e.g. following a schematic such as a terminal block diagram, and the interdependencies of the network infrastructure devices) -Demonstrate knowledge of different industrial network infrastructure devices, their places in the industrial network, and the networking/device characteristics such as QoS, precise timing, industrial topologies, network resiliency, ruggedization, bandwidth, etc. -Illustrate understanding of the interconnections for the full network within a validation of the entire industrial network connectivity and that it is aligned with the provided design diagram (correct number of devices and/or IP addresses, cables are properly labelled and connected to the proper places, usage of appropriate icons) to include ensuring that configuration files are up to date and available -Illustrate an understanding of the safety and security risks (company or industry, e.g. Purdue model) for a given industrial infrastructure device and apply the appropriate steps to secure it (e.g. are unused ports turned off, telnet versus SSH, https versus http, network segmentation) |
| Install, Replace, and/or Remove an End-Device | 15% | -Demonstrate knowledge of different industrial end-point devices and the interconnections for those devices to perform appropriately in an industrial setting to incorporate elements of bandwidth, real-time, precision, etc. -Given a config script for a topology, determine the appropriate location for the installation of the industrial ruggedized end-point device and how that device will interact with other elements -Ensure proper industrial network operation of a given end-device following replacement by verifying that industrial ruggedized elements (ports, IP address, connectivity, subnet mask, default gateway) are appropriately configured/connected -Demonstrate an understanding of safe physical installation of various industrial ruggedized end-devices within an industrial setting following a terminal block diagram |
| Troubleshooting | 35% | -Layer 1
-Layer 2
- Layer 3
- End to End
-Relevant Networking Issues
|
| Install, Replace, and/or Remove Cables (Network and/or Power) | 10% | -Demonstrate the selection of cable channel for an industrial application with appropriate cable and connectors, for example two-pair, four-pair cable, high-flex, high- EMI, unshielded, fiber, and copper -Demonstrate safe and secure installation, identification, and documentation best practices for various industrial environments including grounding, bonding, shielding, etc. (for example: TIA1005, TIA568c.0, EN10174, TIA606b, and NEC article 800) -Identify the steps and tools for validating the newly installed cabling and connectors (for example: TIA568c.2) |
Various version of 200-401 test dumps--- PDF & Software & APP version
Here we will give you some more details of three versions, and all of them were designed for your needs: Pdf version of 200-401 test dumps - Legible to read and remember, support customers' printing request, and also can be shared with your friends or colleagues. Software version of 200-401 test dumps - Providing simulation test system, several times of setup with no restriction. Remember support Windows system users only. App online version of 200-401 test dumps - Be suitable to all kinds of equipment or digital devices. Be supportive to offline exercise on the condition without mobile data or WIFI.
Read the Managing Industrial Networks with Cisco Networking Technologies (IMINS) 200-401 Exam topics below
Candidates must know the exam topics before they start of preparation. Because it will really help them in hitting the core. Our Managing Industrial Networks with Cisco Networking Technologies (IMINS) 200-401 exam dumps will include the following topics:
1.0 IP Networking 20% 1.1 Describe the difference between enterprise environments and industrial environments 1.2 Describe the components for making the data flow highly available and predictable in an industrial environment (QoS, IP addressing, protocol, and hardware resiliency) 1.3 Interpret and diagnose problems that are related to QoS 1.4 Describe the differences between redundancy and resiliency requirements / approaches between the enterprise and the plant floor 1.5 Differentiate the capabilities of switch types 1.6 Describe the life cycle of a multicast group 1.7 Describe and configure the operation and use cases for NAT 1.8 Describe and configure the operation and use cases for static routing 1.9 Describe and configure VLAN trunking to a virtual switch 1.10 Describe and configure Layer 2 resiliency protocols (Spanning Tree, REP, Flex Links, and Etherchannels) 1.11 Configure switch ports (macros, threshold alarms) 2.0 Common Industrial Protocol (CIP) Knowledge and Configuration 19% 2.1 Explain the CIP connection establishment process 2.2 Explain producer/consumer models and implicit/explicit message models 2.3 Recognize communication abilities and capacities in different hardware/hardware generations (revisions) 2.4 Identify and describe the technologies that enable CIP Motion and CIP Safety 2.5 Identify the applicability, limitations, and components of a DLR implementation 2.6 Implement multicast features for CIP within a LAN 2.7 Optimize RPI on a CIP connection given a set of parameters 2.8 Enable and configure IEEE 1588 PTP at the system level 2.9 Configure the Stratix using the Add On Profile (AOP) in Studio 5000 2015 Cisco Systems, Inc. This document is Cisco Public. Page 2 3.0 ProfiNET Knowledge and Configuration 19% 3.1 Describe the differences in ProfiNET support between Cisco catalyst and Cisco Industrial Ethernet (IE) switches 3.1.a Support for VLAN 0 3.1.b Support for ProfiNET LLDP 3.1.c Support for GSDs (integration into SIMATIC STEP 7) 3.2 Describe the operation and purpose of ProfiSAFE 3.3 Describe the three basic ProfiNET devices and conformance classes 3.4 Describe the ProfiNET application classes and communication channels 3.5 Describe DCP and how it can be used for IP addressing of devices and configuration pushes 3.6 Describe ring network requirements for ProfiNET 3.7 Enable ProfiNET on the switch 3.8 Enable Layer 2 QoS to ensure ProfiNET is prioritized 3.9 Integrate the Cisco IE Switch in SIMATIC STEP 7 3.10 Configure and monitor ProfiNET alarm profiles on IE switches 4.0 Security 12% 4.1 Describe the defense in-depth approach to securing the industrial zone 4.2 Identify how a security component (hardware/software) applies to a network device to meet the network security definition of defense in depth 4.3 Describe network device hardening 4.4 Describe the concept and mechanisms of implementing logical segmentation 4.5 Identify possible options to control traffic between zones (ACLs, firewalls, VLANs) 5.0 Wireless 10% 5.1 Describe the differences between 802.11a/b/g/n/ac 5.2 Describe the components that you need to build multiple wireless networks on a single access point 5.3 Describe the difference between autonomous and controller-based access points and wireless workgroup bridges 5.4 Demonstrate a typical switchport configuration for autonomous and controller-based access points 5.5 Describe the limitations of using a workgroup bridge with a control communication 6.0 Troubleshooting 20% 6.1 Troubleshoot advanced Layer 1 problems such as mechanical deterioration, electromagnetic noise issues, and infrastructure mismatches 2015 Cisco Systems, Inc. This document is Cisco Public. Page 3 6.2 Troubleshoot VLAN trunking 6.3 Troubleshoot an error disabled port 6.4 Troubleshoot basic spanning tree port state and root priority problems 6.5 Troubleshoot Layer 3 problems by inspecting route tables and NAT tables 6.6 Troubleshoot Layer 3 problems in a VRF-lite enabled environment 6.7 Demonstrate the ability to find the location of a device within a multi-switch network given an IP address 6.8 Identify methods for troubleshooting a communication problem in a CIP environment 6.9 Troubleshoot CIP using an Ethernet/IP browse tool, command line, and a web browser 6.10 Troubleshoot device communications performance 6.11 Identify the source of cable and device faults in a DLR 6.12 Identify methods for troubleshooting a communication problem in a ProfiNET environment 6.13 Troubleshoot ProfiNET using SIMATIC STEP 7 to view network topology, use the switch command line
Easy-handled purchasing process
We cooperate with one of the biggest and most reliable mode of payment in the international market, which is safe, effective, and convenient to secure customers' profits about 200-401 test questions: Managing Industrial Networks with Cisco Networking Technologies, so you do not need to worry about deceptive use of your money.
Dear examinees, firstly we feel heartfelt to meet you, and welcome to browse our website and products. As you can see, we are here to offer you 200-401 test questions: Managing Industrial Networks with Cisco Networking Technologies for your test exam. In a fast-developed society, this kind of certificate is no doubt a promise to your career and job promotion, so we will give you a concise introduction of our 200-401 pass-king dumps.
24/7 online aftersales service
Our aftersales service agents are online waiting for your questions with sincerity 24/7, if you have any problems with 200-401 test questions: Managing Industrial Networks with Cisco Networking Technologies, go ahead and ask us directly through Email or other aftersales platforms. We give you 100% promises to keep your privacy.
After purchase, Instant Download: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)
Considerate reliable Managing Industrial Networks with Cisco Networking Technologies testking PDF
In accordance of date provided by former customers, we summarized the results---99% of passing rate or above, which totally indicates the accuracy and availability of 200-401 test questions: Managing Industrial Networks with Cisco Networking Technologies. To figure out the secret of them, we also asked for them, and they said only spend 2 or 3 hours a day on Managing Industrial Networks with Cisco Networking Technologies test dumps in daily life regularly and persistently, you can be one of them! Because 200-401 test engine have covers all important test points you need. One point that cannot be overlooked is our exert teams who dedicated to study of 200-401 test online, they are professional and made us practice dumps professional.
One-year free update
Nowadays, experts of 200-401 test online often update details and information quickly, but the main test points are still steady, and we have already compiled and sorted out them for you. On condition that some test points change, we shall send new 200-401 test questions: Managing Industrial Networks with Cisco Networking Technologies to you as soon as possible once you place our order of our products. Besides, we give you our promise here that if you fail the test with 200-401 pass-king dumps, we will give back full refund according to your transcript, or you can switch other exam dumps materials freely as your wish. We also provide other benefits such as discount on occasion. On your way to success, we are dream help. If you are a little suspicious about 200-401 test questions: Managing Industrial Networks with Cisco Networking Technologies, please download our free demo to check materials first before making your decision. There is no need to be afraid of wasting of your time; for you can download all 200-401 pass-king dumps after paying for it.
