Jan 10, 2025 PASS Cisco 300-615 EXAM WITH UPDATED DUMPS [Q98-Q123]

Jan 10, 2025 PASS Cisco 300-615 EXAM WITH UPDATED DUMPS

300-615 Questions PDF [2025] Use Valid New dump to Clear Exam

Cisco 300-615 certification exam is designed to test the knowledge and skills of IT professionals who are responsible for troubleshooting Cisco data center infrastructure. 300-615 exam is part of the CCNP Data Center certification track and is aimed at individuals who have experience in working with data center technologies such as Cisco Nexus switches, Cisco ACI, and Cisco UCS. 300-615 exam covers a range of topics related to troubleshooting network issues, including network protocols, routing and switching, virtualization, and storage.

NEW QUESTION # 98
Refer to the exhibit A network administrator must provide Bash shell access to the support team for all of the Cisco Nexus 9000 Series Switches. The newly created user that is named
"bashusers" fails to access the Bash shell. Which action resolves the issue?

A. Associate bashusers with the Cisco NX-OS network-operator role and activate the bash-shell feature.
B. Associate bashusers with the Cisco NX-OS vdc-admin role and activate the nxapi feature.
C. Associate bashusers with the Cisco NX-OS network-admin role and activate the guestshell feature.
D. Associate bashusers with the Cisco NX-OS dev-ops role and activate the bash-shell feature.

Answer: D

NEW QUESTION # 99

Refer to the exhibit. An engineer is investigating a role mapping issue on a switch. The users report that they cannot view the IP addresses under the tenant "corp". Which action resolves the issue?

A. Configure the correct secret password between the APIC and the RADIUS server.
B. Add the users to the RADIUS server.
C. Update the UNIX ID.
D. Add the updated avpair to include/corp/admin/

Answer: A

Explanation:
Section: Automation

NEW QUESTION # 100
Refer to the exhibit. Cisco UCS Manager is being upgraded using the Auto Install feature, but the FSM fails. Which action resolves the issue?

A. Remove the service pack from the subordinate fabric interconnect.
B. Clear the startup version of the default infrastructure pack.
C. Acknowledge the primary fabric interconnect.
D. Upgrade the firmware of the infrastructure firmware by using the force option.

Answer: B

NEW QUESTION # 101
Refer to the exhibit. Server A and Server B experience inter-L2VN reachability issues. A BGP L2VPN session is up on both leaf switches and each leaf switch learns the host routes of its local server, but the remote host routes are not in the VRF routing table. Which configuration resolves the issue?

A. Configure BGP VPNv4 neighborship between the leaf switches and the spine.
B. Modify multicast groups on Leaf1 to be unique per VNI.
C. Associate Layer 3 VNI to VRF on the NVE interface for both leaf switches.
D. Apply an anycast gateway to each SVI gateway on both leaf switches.

Answer: C

NEW QUESTION # 102
An FSM failed during an uparade with the auto-install feature enabled. The engineer must remove the service pack from the subordinate fabric interconnect (FI) to recover the Fls. Which set of commands resolves the issue?

A. UCS-A# scope fabric-interconnect b
UCS-A# /fabric-interconnect # remove service-pack security
UCS-A# /fabric-interconnect* # commit-buffer
B. UCS-A# scope fabric-interconnect b
UCS-A# /fabric-interconnect # remove service-pack
UCS-A# /fabric-interconnect* # commit-buffer
C. UCS-A# scope org
UCS-A/org # scope fw-infra-pack default
UCS-A /org/fw-infra-pack # set infra-bundle-version
UCS-A/org/fw-infra-pack* # commit-buffer
D. UCS-A# scope org
UCS-A/org # scope fw-infra-pack default
UCS-A /org/fw-infra-pack # set infra-bundle-version
UCS-A# /fabric-interconnect # remove service-pack security
UCS-A# /fabric-interconnect* # commit-buffer

Answer: A

NEW QUESTION # 103
Refer to the exhibit.

Refer to the exhibit. A network engineer is configuring the FCoE N_Port virtualization storage area network. After the initial implementation, server 11 fails to connect to the disk array. Which action resolves the issue?

A. On N9K interface vfc11 and MDS interface vfc 1/1, change switchport mode configuration to F
B. On N9K interface vfc11 and MDS interface vfc 1/1, change switchport mode configuration to E
C. On MDS interface vfc 1/1, change switchport mode configuration to VF
D. On N9K interface vfc11, change switchport mode configuration to NP

Answer: B

NEW QUESTION # 104
Refer to the exhibit.

The HSRP instance on both switches is showing as active. Which action resolves the issue?

A. Allow VLAN 100 between the switches.
B. Configure the HSRP timers to be the same.
C. Configure preempt on only one of the switches.
D. Configure the IP address of N9K-B on the same subnet as N9K-A.

Answer: C

NEW QUESTION # 105
Refer to the exhibit.

An engineer is troubleshooting the connectivity between Server-1 and Server-2. Which action resolves the connectivity issue?

A. Classify CFS messages for strict priority queue on spine switches
B. Configure the same source IP address on NVE and virtual peer link on leaf switches
C. Enable BGP advertise pip feature on both leaf switches
D. Change all ports on spine switches as port-type fabric

Answer: A

NEW QUESTION # 106
Refer to the exhibit.

The HSRP configuration in the exhibit fails to function. Which action resolves this issue?

A. Configure HSRP version 2.
B. Set the MTU to 1500 bytes.
C. Enable IP redirects.
D. Configure the same HSRP group on both devices.

Answer: C

NEW QUESTION # 107
Refer to the exhibit.

The connection between a Cisco Nexus 5548UP switch and a Cisco MDS switch fails to initialize. What is the cause of the issue?

A. Trunk mode must be activated.
B. VSAN 1 is suspended.
C. The SFP is unsupported.
D. The interface is in an incorrect mode.

Answer: A

NEW QUESTION # 108
Refer to the exhibit. A new Cisco Nexus 5548 Switch connects to a network. SAN switching is configured on the switch. The switch fc2/10 NP uplink is shown in the exhibit. Which action ensures that fc2/10 is in an up state?

A. Replace the SFP port module in fc2/10.
B. Configure the admin port type E on the upstream switch that connects the port.
C. Enable NPIV on the upstream switch that connects the port.
D. Configure the BB_credit buffers on the upstream switch that connects the port.

Answer: C

NEW QUESTION # 109
Refer to the exhibit.

An OSPF adjacency between Router-A and Router-B cannot reach the FULL state. Which action resolves the issue?

A. Adjust the MTU on Router-A to 1600.
B. Disable the check of the MTU value.
C. Adjust the MTU on Router-B to 1604.
D. Set the OSPF media type to point-to-point.

Answer: B

NEW QUESTION # 110
Refer to the exhibit.

A network administrator must delete a feature group from a Cisco Nexus 5000 Series Switch. Which action resolves the issue?

A. Detach the association with the no rule command within the feature-group configuration
B. Detach the association with the no role command within the feature-group configuration mode
C. Detach the association with the no rule command within the role configuration mode
D. Detach the association with the no role command within the role configuration mode

Answer: B

NEW QUESTION # 111
An engineer upgrades Cisco UCS firmware from release 3. 1(2) to release 3. 1(3) using Autolnstall. Both fabric interconnects go ofline during the software upgrade installation and issue multiple F SM retries in the DeployPollActivate stage. Which set of actions resolves the issue?

A. Enable the management interface monitoring policy on the fabric interconnects. Initiate a configuration backup on both fabric interconnects.
Commit the pending fabric interconnect reboot activity.
B. Fix the rights to 666 with the debug plugin on the primary fabric interconnet Save the current configuration on the running fabric interconnect.
Continue the upgrade on both fabric interconnects.
C. Acknowledge the error and reboot the primary fabric interconnect. Clear the default firmware version and upload a new one.
Restart the upgrade process manually.
D. Clear the startup version of the default infrastructure and server pack. Remove the service pack from the subordinate node.Upgrade with the Force attribute through Autolnstall.

Answer: D

NEW QUESTION # 112
An engineer configures FCoE between a set of ESXi hosts and a Cisco Nexus 5000 Series Switch. The Converged Network Adapter of the host fails to receive the response from the Cisco Nexus device. Also, the VFC interface is in a down state and the FIP adapter fails to receive 802.1q tagged frames. The host interface is configured for VLAN trunking. Which action resolves the issue?

A. Configure the UF link as a spanning-tree edge port
B. Enable the active STP port state on the bound Ethernet interface
C. Set the bound Ethernet trunk interface to non-FCoE native VLAN
D. Activate the reception of Xoff pause frames from the server

Answer: C

NEW QUESTION # 113
Refer to the exhibit. An engineer is troubleshooting the connectivity between Server-1 and Server-2. Which action resolves the connectivity issue?

A. Classify CFS messages for strict priority queue on spine switches
B. Configure the same source IP address on NVE and virtual peer link on leaf switches
C. Enable BGP advertise pip feature on both leaf switches
D. Change all ports on spine switches as port-type fabric

Answer: A

Explanation:
https://www.cisco.com/c/en/us/td/docs/dcn/nx- os/nexus9000/101x/configuration/vxlan/cisco- nexus-9000-series-nx-os-vxlan-configuration-guide- release-
101x/m_configuring_vpc_multihoming.pdf

NEW QUESTION # 114
Refer to the exhibit. A network engineer is troubleshooting a Cisco Nexus 5000 Series Switch.
The interface between the server and the switch is nonoperational and is expected to operate at
10 Gbps. The drain rate of the interface is 3 Mbps. Which action resolves the issue?

A. Set priority flow control pause
B. Configure pause error-disable recovery
C. Reset priority flow counters
D. Enable link level pause on the interface

Answer: B

Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/troubleshooting/guide/N5K_Troubleshooting_Guide/n5K_ts_fcoe.html

NEW QUESTION # 115
Refer to the exhibit. customer reports that all Intra-EPG isolation stopped working within a bare- metal tenant. Postman is running on a machine to get information from the APIC in case of orchestration failure. Which action resolves the issue?

A. Match encap="vlan-10" and primaryEncap="vlan-110"
B. Modify the GET command to reference the valid path for the managed object
C. Remove primaryEncap="vlan-110" from the specific port path.
D. Change pcEnfPref="unenforced" to pcEnfPref="enforced".

Answer: D

NEW QUESTION # 116
A vPC Type-1 inconsistency between two vPC peers in a VXLAN EVPN setup is discovered. Which two actions need to be attempted to resolve the issue? (Choose two.)

A. Configure the NVE interfaces to be Up on both switches.
B. Set a different primary IP addresses on NVE source-interface.
C. Set a different distributed gateway virtual MAC address.
D. Configure the same VNI to multicast group maping.
E. Set a different secondary IP addresses on NVE source-interface.

Answer: A,D

Explanation:
Section: Network

NEW QUESTION # 117
"A network engineer troubleshoots an issue at a Cisco data center environment with these conditions:
* The data center has Cisco Nexus 9000 Series Switches running the vPC setup.
* The gateway of the servers is an HSRP IP address between the VLAN interfaces configured on both Cisco Nexus switches.
* Some of the client application servers are implementing fast-path forwarding for the return traffic.
* Those servers are sending the return traffic to the VLAN interface MAC address instead of the HSRP MAC address.
The network engineer discovers that some traffic is dropped because it passes the vPC peer link to be forwarded out the vPC interface. What must be configured on the vPC switches to resolve the issue?

A. arp synchronize
B. peer-gateway
C. peer-switch
D. spanning-tree

Answer: B

NEW QUESTION # 118
Refer to the exhibit. RBAC is configured on the MDS switch for a new SAN administrator engineer to work on the FSPF configuration. However, after the configuration is applied the engineer who was assigned the FSPF_Admin role cannot perform any configuration changes.
Which action resolves the issue?

A. Reload the switch
B. Remove rule 1 from the role
C. Write rule 2 before rule 1
D. Configure the switch license for RBAC

Answer: C

NEW QUESTION # 119
A mission-critical server is connected to site A. Connectivity to this server is lost from site B because the MAC route is missing in the OTV VDC of the Nexus 7000 in site B due to MAC aging. Which action allows the flooding of the unknown unicast MAC on the Nexus 7000 in the OTV VDC?

A. Use the otv flood mac <> command to selectively flood traffic for a given MAC.
B. Unknown unicast flooding is not allowed.
C. Use the otv isis bfd <> command to configure BFD protocol.
D. Use route-map to advertise this MAC statically and redistribute with ISIS.

Answer: A

Explanation:
With the Cisco NX-OS Release 6.2(2), we now support selective unknown unicast flooding based on the MAC address. In order to use this feature, the following one-line configuration must be added:
OTV-VDC(config)# otv flood mac 0000.2101.1111 vlan 72
https://www.cisco.com/c/dam/en/us/products/collateral/switches/nexus-7000-series-switches/guide_c07-728315.pdf (Page 6)

NEW QUESTION # 120
A firmware upgrade on a fabric interconnect fails. A bootflash contains a valid image. Drag and drop the recovery steps from the left onto the correct order on the right.

Answer:

Explanation:

NEW QUESTION # 121
Refer to the exhibit. The OTV adjacency fails to come up. Which set of commands on each switch resolves the issue?

A. otv extend-vlan 5
no otv extend-vlan 11
B. otv extend-vlan 5
otv site-vlan 5
C. otv extend-vlan 5
no otv site-vlan 5-10,11
D. no otv site-vlan 5,10-11
otv site-vlan 5

Answer: D

NEW QUESTION # 122
Refer to the exhibit.

An engineer troubleshoots the HSRP configuration and notes that the remote end uses HSRP version 1. The engineer sets the local HSRP to version 1, but the problem continues. Which action resolves the issue?

A. Reduce the priority of the local HSRP to below 100 to force the local HSRP to standby and then change the version to version 1.
B. Change the local group number to 255 or less and request that the remote data center matches the group member in its configuration.
C. Run version 1 and version 2 HSRP on VLAN300 in the local data center.
D. Set the local group number as 300 in the remote data center configuration

Answer: B

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp_fhrp/configuration/xe-16/fhp-xe-16-book/fhp-hsrp-v2.p