Pass Veeam Veeam Certified Engineer (VMCE) V10 Exam in First Attempt Guaranteed Updated Dump from TestPassKing!
Pass VMCE_V10 Exam with 50 Questions - Verified By TestPassKing
NEW QUESTION 25
A virtual machine in your environment has been hit by a virus. You need to restore the virtual machine as fast as possible. At the same time, you need to make sure that any dormant virus on the backed up virtual machine is detected. What restore method should you use when recovering to a new location?
- A. Instant VM Recovery with "staged restore"
- B. Instant VM Recovery with "secure restore"
- C. Virtual disk restore
- D. SureBackup
Answer: B
Explanation:
Reference: https://helpcenter.veeam.com/docs/backup/em/em_disk_restore.html?ver=100
NEW QUESTION 26
When planning to back up files and folders from shared sources, that is the correct method to connect to the file share from the Veeam backup server?
- A. Add the file share into the store infrastructure
- B. Add the file share into the managed servers
- C. Add the file share into the physical infrastructure
- D. Add the file share into the inventory
Answer: B
NEW QUESTION 27
When you back up regular or standalone VMs in vCloud Director, which of the following is captured and stored in Veeam's Backup & Replication backup file? (Choose three.)
- A. VM disk content
- B. In-guest iSCSI disk
- C. Raw device mapping
- D. Linked clone VM's prior to vCenter 6.5
- E. vApp metadata
- F. VM metadata
Answer: A,E,F
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/vcloud_regular_vm_restore.html?ver=
100
NEW QUESTION 28
When a replication job is configured to use the replica mapping feature (no seeding), what will happen during the first run of the job?
- A. The replication job will first restore the VM from the most recent restore point and then start to synchronize the incremental changes from the source infrastructure
- B. The replication job creates a clone of the mapped replica to preserve the original state before synchronizing the changes from the source infrastructure
- C. If a VM within the replication job is not mapped, the job will fail
- D. The replication job calculates the differences between the original and mapped VM; only the incremental changes will be synchronized
Answer: D
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/hyperv/replica_seeding_hv.html?ver=100
NEW QUESTION 29
When deploying an advanced single-host virtual lab in a VMware environment, what will Veeam create?
- A. A standard virtual switch with uplink(s)
- B. A distributed virtual switch without uplink(s)
- C. A standard virtual switch without uplink(s)
- D. A distributed virtual switch with uplink(s)
Answer: A
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/surebackup_advanced_vlab.html?ver=
100
NEW QUESTION 30
Veeam is used for replicating VMware VMs. The production environment is comprised of two networks: 192.168.1.0/24 and 172.16.0.0/16. A web application requires a database server (whose IP address is 172.21.0.12) to receive queries from a web client (whose IP address is 192.168.1.32). The replicas are spread over multiple hosts. A backup administrator needs to configure a virtual lab to test a web client to database server query.
Which of the following virtual lab types must be configured?
- A. Advanced single-host
- B. Basic single-host
- C. Advanced multi-host
- D. All virtual lab configurations would support that
Answer: A
NEW QUESTION 31
A backup administrator is deploying a Veeam ONE environment. They have chosen to use separate servers from their Veeam Backup & Replication environment. What benefit will they receive if they install the Veeam ONE Agent onto their backup server?
- A. Collect virtual environment configuration from Veeam Backup & Replication
- B. Analyze Veeam Backup & Replication log data and retrieve signature updates
- C. Collect Veeam Backup & Replication logs and execute remediation actions
- D. Track whether VMs and agents are properly protected and following the 3-2-1 rule
Answer: A
NEW QUESTION 32
Select the correct description of a synthetic full backup.
- A. A synthetic full backup will generate a new VBK file by getting data from the hypervisor
- B. A synthetic full backup combines a VBK file with one or more VIB files from a repository to generate a new VBK file
- C. A synthetic full backup will update the existing VBK with data from the hypervisor and generate a new VRB file
- D. A synthetic full backup combines a VIB file with one or more VBK files from a repository to generate a new VBK file
Answer: A
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/hyperv/synthetic_full_backup.html?ver=100
NEW QUESTION 33
Which of the following statements are true regarding backup copy jobs in Veeam Backup & Replication? (Choose two.)
- A. The backup copy job creates a forever forward incremental backup chain
- B. Retention settings maintain the desired number of restore points as well as offer optional GFS for archival purposes
- C. The backup copy job creates a single file with multiple restore points included within for archival purposes
- D. Backup copy jobs copy entire VBK, VIB, or VRB files from the source backup repository to the target backup repository
- E. During the backup copy job process, a VM snapshot is created for consistency
Answer: A,B
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/about_backup_copy.html?ver=100
NEW QUESTION 34
A customer has a physical proxy configured for Direct Storage Access without failover to network mode. The backup fails. What could be the issue?
- A. One or more of the VM disk(s) are on Wols
- B. The datastores are properly zoned and exposed to the proxy server but in read-only mode
- C. The disks being processed are IDE and/or SATA
- D. The storage is not added into the storage infrastructure, inside the backup and replication console
- E. Write access has not been enabled on the SAN
Answer: E
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/direct_san_access.html?ver=100
NEW QUESTION 35
You fail back a VM replica to the original location. Which of the following requirements needs to be met to be able perform quick rollback during a failback of a replica?
- A. Perform failback to VM within the same subnet
- B. The VM replica must have access to the repository where the full backup of the VM resides
- C. The VM replica must be created with the "Use Changed Block Tracking data" option enabled
- D. Indexing must be enabled for the original VM
Answer: C
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/failback_quick_rollback.html?ver=100
NEW QUESTION 36
Which of the following predefined tests can be performed during a SureBackup verification test on a backup file? (Choose three.)
- A. OS test
- B. Application test
- C. SAN check
- D. Heartbeat test
- E. Ping test
- F. Boot time
Answer: B,D,E
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/hyperv/surebackup_tests.html?ver=100
NEW QUESTION 37
A company has replicated their critical application VMs to a second data center in another region. Their key application includes two database VMs and three application VMs. For proper operation, the database VMs need to start before the application VMs. What needs to be configured in Veeam to prepare for a disaster recovery situation?
- A. Use a failover plan
- B. Use on-click failover
- C. Use a planned failover
- D. Use Instant VM Recovery
Answer: D
Explanation:
Reference: https://www.veeam.com/virtual-machine-backup-solution-free.html
NEW QUESTION 38
A company needs to recover a domain controller from a backup file they have on premises which was created by the Veeam Agent for Microsoft Windows. Which of the following would provide the fastest access to the domain controller?
- A. Recover the domain controller to an AWS EC2 instance using the restore to Amazon EC2
- B. Perform a bare metal recovery of their domain controller back to the original system
- C. Use the Veeam Explorer for Active Directory to recover the domain controller
- D. Perform an Instant VM Recovery to recover the domain controller to a VM on their VMware host
Answer: D
Explanation:
Reference: https://www.veeam.com/blog/how-to-recover-a-domain-controller-best- practices-for-ad- protection.html
NEW QUESTION 39
Veeam ONE has been installed in the typical data collection mode and historical data is the installation default. A customer is looking at performance charts in Veeam ONE Monitor.
When troubleshooting a performance event from two days ago, what will they see?
- A. Data does not exist
- B. Raw data every 20 seconds
- C. Aggregated data every two hours
- D. Aggregated data every five minutes
Answer: C
NEW QUESTION 40
A Veeam backup administrator, protecting all VMs in a VMware environment with backups and replicas, has been requested to run a multi-server application in an On-Demand Sandbox. The sandbox needs to stay powered on, uninterrupted, for 30 days while daily backups and replicas continue to run. How can this be done?
- A. Create an application group and leverage regular backup restore points as the source for the application group
- B. Create a (secondary) replication job for the required VMs that are not scheduled to run; make an application group and use these replicas as the source
- C. Create a (secondary) replication job for the required VMs that are not scheduled to run; create a SureBackup job and use these replicas as the source
- D. Create an application group and leverage regular replica restore points as the source for the application group
Answer: A
NEW QUESTION 41
......
Penetration testers simulate VMCE_V10 exam: https://www.testpassking.com/VMCE_V10-exam-testking-pass.html